|
|
|
|
| 1. Lightly
screw into compressor air outlet, 1/4" pipe coupler. Always use
Teflon tape. Do not tighten yet.
*If you purchased set without optional
filter, skip steps 1 + 2 start at step 3 and install coupler
directly to compressor.
|
|
2.
Screw on air filter
(filter type may vary, but are all similar).
Be sure air flow arrow is pointing away from compressor. |
|
|
|
|
|
|
|
|
3. Install Male
threaded Master Quick Coupler
|
|
-
A - Female Master Quick
Coupler, install on 25' coiled Air Line end. (photo 5)
-
B - Female Quick
coupler, install on other end of coiled 25' Air Line (photo 6)
-
C - Male Quick Coupler,
install on D Tire Chuck
-
Recommend Always use
Teflon Tape
|
|
|
|
|
|
|
|
|
5. Air Line End |
|
6. Air Line End |
|
|
|
|
|
|
|
|
7. Using 25' Air
Line
|
|
8. Male Quick
Couplers.
For Single & Dual Action Airbrushes
use adapters as in photo 9.
For Paasche Airbrushes, attach Male Coupler to Paache Airline. |
|
|
|
|
|
|
|
|
9. For Single
and Dual Action Airbrush Kit's, Attach 1/8" to 1/4"
adapter to Male Quick Coupler. Airbrush Air Line then attaches to
1/8" side of adapter. |
|
10. "Plug"
your Air line Quick Coupler into
your Coiled Air Hose, or to your
Compressor directly as in photo 11.
|
|
|
|
|
|
|
|
|
11. Airbrush Air Line
directly to compressor. |
|
|
|
|
|
|
|
|
|
